How to tell if your brew is infected by bacteria

Saturday, December 17, 2022

There's a really simple way to tell if your beer is contaminated


Ready for this life changer?

Drink it. 

If it tastes like the scummiest thing you've ever put in your mouth, it's infected.

If it makes you vomit, it's infected.

If it smells like someone set off a sulfur bomb, it's infected.

Rotten eggs... well.

If you open the cap and the beer explodes like it has been shaken up a thousand times, it's probably infected. This happens as rogue yeast or bacteria has over-carbonated your beer, resulting in too much pressure building.

Such an explosion should not be confused with a beer bomb caused by the addition of too much sugar when you primed the beer.

Basically, a good rule of thumb is that if you really have to ask if your beer is infected, then the chances are it probably is.

You can, of course, do a visual inspection of your beer before you bottle it as well. What you are looking for at the top of the wort is the formation of 'pellicle' (or a yeast raft)- which is a collection of microbes hanging out on top of your beer.

This may not happen with every infection, however.

The pellicle formation can look a bit like this:

pellicle infection of beer

or even this:

beer infection


Which is a real shame because it's not just the fact that your beer is ruined by bacteria or wild yeast commonly referred to as brettanomyces, it's that you've lost your time - it doesn't matter if you've used a kit or done a diligent boil, you have lost those precious minutes.

You've also lost a bit of cash, which can hurt a little, especially if you've gone and sourced that special wheat yeast from the brew shop or those homegrown hops that you drove 45 minutes to get from a brewing mate who swears they are the best he's ever grown.

So what did you get out of this?

Experience.

It's quite likely that user error caused the infection to occur so maybe there's a lesson here for you that you can learn:

ALWAYS

CLEAN

&

SANITIZE

YOUR 

BREWING 

EQUIPMENT

I learned from my screw up and have never had an infected batch of beer again and that was like three years ago.

Sure, it can be a pain to do the job right but if you want to have a beer that's right to drink, you gotta clean.

So let's talk about the causes of infection.

The most likely cause is as you've probably understood if you've got this far is that uncleanliness leads to infection. By giving bacteria something to feed on or hide in, you open yourself up to a higher chance of infection occurring.

So, clean your fermenter, brewing spoons, pipes, spigots, taps, mash tuns and whatever else you use on brewing day. There's many kinds of cleaning agents you can use (such as the famous Powdered Brewery Wash) but a bit of elbow grease with damn hot to boiling water will do you justice.

Then, sanitization is key. We have promoted sodium percarbonate many times on this site as we think it just does wonders and since we have adopted it, we've never had a problem.

The best part about using sodium percarbonate?

You’ve probably already got some as it’s found in ordinary laundry soak!

So on brewing - clean and sanitizing everything. Don't be lazy or your beer will be hazy!

The next time you'll want to think about bacteria is bottling or kegging day.

Yep, it's almost a case of literally rinsing and repeating.

Your keg and bottles must be free of any gunk and residue yeast. Given them a damn good clean and then use your sanitizer of choice.

In the case of bottles, my favourite trick is to run them through the dishwasher on the heaviest setting. First I rinse them with water to remove all the sediment etc and then they go in. At the Heavy Duty setting, the dishwasher will use the hottest water it can and that kills the bugs. I then store them in a clean drum under a blanket.

Then on bottling day, a quick soak in some sodium percarbonate solution makes things just right.

You can always tell if you haven't done this part properly because if in your whole batch of bottled beers one or two do not taste right but the rest do, you can reasonably assume the issue was with the individual bottle and not the batch as a whole.

mega pellicle for an infected beer batch
This "mega Pellicle' was from a beer brew that was found to be infected.

That Rotten Eggs smell from beer


We mentioned that rotten eggs can be a sign of an infected beer. That may well be true but it is not true in every case.

If you have used a yeast strain that produces this kind of smell your beer is OK. If you open a bottle-conditioned beer too early, you might be able to get those 'eggy' tones.

If you let your beer condition for long enough, that smell will go away as the yeast will continue to work everything out.

If your beer's water is high in sulphate such as that water source infamously discovered at Burton-on-Trent, England then your beer may naturally have this smell as well - the so-called 'Burton Snatch'.

If however, your beer has bacteria that has contaminated your beer, THAT 'smell' is a sign your beer is ruined. 

How can you tell? 

Do the taste test and that will give you a big indicator.

If you make wine or cider, there is another risk vector for your brew. That is the natural yeasts that can be found in fruit that can wreak havoc.

Many cider makers will use Campden tablets to kill off any wild yeast and then substitute their own yeast more suited to the kind of wine or cider that they wish to make.

1 comment:

  1. Awesone, thank you. My wort is a funny colour in the collection bottle on my WilliamsWarm brew keg. I suspect infected.

    ReplyDelete

Powered by Blogger.

Tags

absorption caps abv acetaldehyde acid adjuncts advice about beer brewing aeration aeration kit aging air lock alcohol alcohol poisoning ale ale beer kits alkaline alkaline brewery wash all grain american amylase apera apples attenuation autolysis automatic temperature compensation bacteria baker's yeast baking yeast ball lock ball valve bar keepers friend barley batch prime beer brewing beer capper beer dispenser beer filtration kit system beer gushers beer kit beer kit review beer kits beer lines beer salt beer taps beerstone best brewing equipment biotin bittering BKF black rock bleach blichmann blow off tubing bluelab bohemian pilsner boil in a bag boil over boneface bottle cap bottle caps bottle conditioning bottling bottling beer bottling spigot bourbon brettanomyces brew and review brew day brewing beer guide brewing salts brewing spoon brewing sugar brewing thermostat brewzilla british thermal unit brix brix scale BTU budvar buffer buffer solution burton snatch buyer's guide calcium chloride calcium sulphate calibration calibration probe calibration solution campden tablets capping carbon dioxide carbonation carbonation drops carboy cascade caustic soda cherry wine chinook chlorine christmas chronicle cider clarity cleaning your equipment clear beer clone recipe cloudy beer cold crashing coldbreak conditioning tablets conductivity conical fermenter contamination coopers copper tun corn sugar cornelius corny keg craft beer creamy beer crown cryo hops cubes danstar nottingham demijohn dextrose distilation DIY DME dopplebock draught dry hopping dry malt extract edelmetall brĂ¼ burner eisbock ekuanot electrode enhancer enzyme equipment ester ethanol experiments in beer making faucet fermcap-s fermentables fermentation fermenter fermentis fermentor final gravity finings five star flat beer floccing foam inhibitor force carbonation french fresh wort pack fridge fruit fusel alchohol garage project gas burners gelatin gift and present ideas gin ginger beer glucose golden ale golden syrup goldings gose grain grain mill green bullet grist guinness gypsum hach hacks hallertauer heat mat heat pad heat wrap home brew honey hop schedule hops hops spider how not to brew beer how to brew that first beer how to brew with a beer kit how to grow hops how to make a hop tea how to wash yeast hydrated layer hydrogen sulfide hydrometer IBU ideas idophor infection inkbird instruments isoamyl acetate jelly beans jockey box john palmer juniper keezer keg cooler keg regulators kegco kegerator kegging kegs kettle kombucha krausen lactic acid lager lagering lauter lion brown liquid malt extract litmus LME lupulin lupulin powder lupuLN2 making beer malic acid malt malt mill maltodextrin mangrove jack's maple syrup mash mash paddle mash tun mccashins mead methanol micro brewing milling milwaukee MW102 mistakes mixing instructions moa mouth feel muntons must nano brewing New Zealand Brewer's Series no rinse nut brown ale oak oak wood chips off flavors original gravity oxygen pacific gem palaeo water pale ale panhead parsnip PBW pear pectine pectolase perlick ph levels ph meter ph pen pH strips ph tester pico brewing pilsner pitching yeast plastic drum poppet valve pot powdered brewing wash ppm precipitated chalk pressure relief valve priming prison hooch probe problem solving propane and propane accessories pruno pump system purity law radler re-using yeast recipe record keeping reddit refractometer reinheitsgebot removing beer labels from bottles review rice hulls riwaka rotten eggs saaz saccharomyces cerevisiae salt sanitization secondary regulator sediment seltzer session beer silicon simple tricks for brewing siphon site glass skunked beer small batch brewing soda soda ash soda stream sodium carbonate sodium carbonate peroxyhydrate sodium hydroxide sodium metasilicate sodium percarbonate sour beer sparge spigot spirals spirits spoon spraymalt star san starch STC-1000 steinlager steralisation sterilisation sterilization sterliization still stoke storage solution stout sucrose sugar supercharger tannins temperature temperature controller therminator thermometer tips for beginners tri-sodium phopsphate tricks and tips trub tubing tui turkey vodka infused gin vorlauf water water testing wet cardboard taste wet hopping weta whirlfloc tablets white claw williamswarn wine winter brewing wood wort wort chiller yeast yeast energizer yeast nutrient yeast rafts yeast starter yeast traps zinc
Back to Top